2020 Audi A3 Technik 30 Tfsi 1.0L Petrol · RO70 VSC

The most recent MOT test conducted on 30 September 2025 resulted in a pass with no defects recorded. Looking at the three-year history, the maintenance trend is exceptionally stable, with only a single advisory regarding a chipped windscreen in 2024. The absence of recurring mechanical failures or structural concerns suggests a vehicle that has been kept in good order and is likely to have been subject to a consistent maintenance regime. The recorded mileage of 41,351 miles is consistent with the vehicle age, averaging approximately 6,892 miles per year. This level of usage is considered typical for a modern hatchback and represents a balanced profile. It avoids the accelerated wear on suspension bushes and drivetrain components associated with high-mileage examples, while also avoiding the risks of deterioration associated with prolonged periods of standing, such as perished rubber seals or battery degradation. Given the clean MOT record, the prospective buyer should focus on a physical inspection of consumables that may not trigger an MOT failure but impact long-term reliability. It is essential to examine the tyre sidewalls for any signs of perishing or ozone cracking, as tyres can degrade over time regardless of tread depth. The brake discs should be inspected for surface corrosion or a pronounced lip at the outer edge, and the brake pedal should feel firm and consistent during a test drive to ensure there is no binding in the calipers. Particular attention should be paid to the service history to verify that oil and filter changes have been performed at the manufacturer recommended intervals, as the 30 TFSI engine relies on clean lubrication for timing chain longevity. The buyer should also check the condition of the 12V battery and ensure that the previously noted windscreen chip has been repaired or has not developed into a larger crack. Finally, a test drive should be used to listen for any unusual knocks from the suspension or hesitation during gear changes to confirm the overall mechanical integrity of the vehicle.