2012 Mercedes-Benz C220 Elegance CDI Blueefi-CY A 2.1L Heavy oil · SD12 DZP

A substantial void in the official testing record defines this vehicle's current roadworthiness profile, as there has been no recorded MOT since the clean pass on 11 May 2022. While that specific test showed no defects or advisories, the absence of any certification for over four years indicates the vehicle has likely been off the road or has not been maintained in accordance with legal roadworthiness requirements. This lack of recent data means the current mechanical state is unknown and cannot be extrapolated from the stable result seen four years ago. The recorded mileage of 114,282 miles is consistent with typical usage for a fourteen year old executive saloon, averaging approximately 8,163 miles per year. Mechanically, this level of accumulation usually results in standard wear to drivetrain components and suspension bushings. However, when viewed alongside the multi-year gap in MOT history, this suggests the vehicle has suffered from prolonged periods of inactivity, which frequently leads to seized brake calipers, perishing rubber seals, and potential degradation of the fuel system. Given the extended period without a recorded inspection, a physical examination must prioritise the integrity of the braking system and the condition of the tyres. During a test drive, listen for any binding in the brake calipers or uneven pedal pressure, and check for flat spots or sidewall cracking on the tyres caused by prolonged standing. Any hesitation during acceleration or instability at idle should be noted, as fuel stagnation can affect the efficiency of the common rail system in these CDI engines. Further attention should be paid to the chassis and suspension components that may have succumbed to corrosion while stationary. Inspect the subframe and suspension mounting points for surface rust or structural degradation. During the test drive, feel for any knocks or vibrations through the steering wheel when traversing uneven surfaces, which would indicate that the suspension bushings have hardened or perished during the vehicle's period of inactivity.