2012 Audi A1 1.4L Petrol · SL12 KCX

The vehicle presents a stable maintenance profile following a period of significant mechanical attention in late 2023. While the October 2023 test revealed several failures involving the suspension and braking systems, the subsequent November 2024 and November 2025 tests show no recorded defects. This suggests that the previous owner addressed the identified faults effectively, moving the vehicle from a state of multiple component failures to a clean pass status. The mileage accumulation is consistent with a typical usage pattern for a 14-year-old vehicle. The car has covered approximately 128,900 miles, averaging roughly 9,200 miles per year. The data shows steady progression, with the mileage increasing by about 10,000 miles between the 2024 and 2025 tests, and roughly 10,000 miles between the 2023 and 2024 tests. This regular interval of use suggests the vehicle has not been subject to long periods of inactivity, which helps mitigate risks associated with seized components or perished rubber seals. A physical inspection should focus on the front suspension and braking assembly to ensure the 2023 repairs remain robust. The October 2023 failure flagged an insecure nearside front coil spring, a modified offside front coil spring, and an excessively worn nearside front lower suspension arm bush. Although these passed in later tests, a buyer should check for any unusual knocking sounds or steering play that might indicate recurring wear in these areas. The tester also noted fluctuating offside front service brakes during that period, so verifying the smoothness of the braking action is prudent. The rear suspension also warrants a check, specifically the offside rear shock absorber which showed casing damage and corrosion in 2023. While the November 2025 test recorded no defects, verifying the integrity of the shock absorber casings and the absence of oil leaks is a sensible precaution. Finally, the minor exhaust leak noted in the October 2022 test at 100,431 miles should be checked to ensure the exhaust system remains structurally sound and free from further corrosion.