2014 Vauxhall Adam 1.2L Petrol · WD14 VVB

This vehicle presents a concerning pattern of recurring brake and suspension wear alongside intermittent wiper failures, culminating in a recent July 2026 test where it passed despite significant advisories regarding front suspension top mounts and worn brake discs, while simultaneously failing on a major defect involving the nearside track rod end dust cover. The record indicates a history of mechanical stress on the front end, with brake lag reported in 2025 and corroded coil springs flagged in 2024, suggesting that while the car has been kept on the road, the front suspension and braking components are approaching or exceeding their service life limits. With a recorded mileage of 21,202 miles over approximately twelve years, the annual accumulation rate of roughly 1,767 miles suggests light usage, yet this low mileage does not correlate with a pristine mechanical condition, as evidenced by the corrosion on the front coil springs and persistent oil leaks recorded across multiple years. The fact that a major brake failure was recorded in July 2025, just two years prior to the most recent test, indicates that despite the low odometer reading, the vehicle has experienced sufficient driving stress to degrade braking efficiency and accelerate corrosion in the suspension components. When inspecting the vehicle, pay close attention to the front suspension structure; the worn top mount on the offside front strut and the corroded coil springs on both sides indicate a need for replacement to prevent handling instability and potential loss of ride height. On the test drive, listen for any knocking noises over bumps, particularly from the front, which would indicate the worn strut pin or bush, and check for any pulling to the left or right, which could signify a compromised track rod end despite the dust cover being intact. Additionally, test the brake pedal feel carefully; the history of brake lagging suggests the front brake discs may be thin and the callipers may be sticking, requiring a thorough inspection of the braking system to ensure safe stopping distances.