2016 Bentley Continental GT 4.0L Petrol · X44 TAS

The vehicle most recently passed its MOT on 4 August 2026 with no defects or advisories recorded. Looking back through the history to 2020, the maintenance trend is remarkably stable, exhibiting a consistent record of clean passes. This suggests a vehicle that has been meticulously kept or has experienced minimal operational stress, providing a high level of confidence regarding its basic roadworthiness and structural integrity. With a recorded mileage of 26,422 miles over a ten year period, this Bentley has averaged approximately 2,642 miles per year. This is significantly lower than typical usage for a grand tourer of this caliber. While low mileage generally implies reduced wear on the engine internals, gearbox, and suspension components, it also raises the possibility of the vehicle spending extended periods in stationary storage, which introduces a different set of mechanical risks associated with inactivity. Given the absence of MOT advisories, the physical inspection should focus on age-related degradation rather than wear and tear. It is imperative to examine the tyre sidewalls for signs of perishing or ozone cracking, as tyres can lose their structural integrity over time even if the tread depth remains legal. Similarly, the brake discs should be inspected for surface corrosion or pitting, and the calipers checked for binding, which often occurs when a vehicle is left standing for long durations. Attention must also be paid to the health of the 12V battery and the condition of the fluids. High specification electronics in these vehicles are sensitive to voltage drops, so verify the battery age and charging history. Furthermore, because engine oil and brake fluid degrade based on a calendar schedule rather than mileage alone, the service history should be rigorously scrutinized to ensure that fluid changes have occurred at the recommended intervals. A thorough check of the service book stamps will confirm whether the vehicle has been maintained according to the manufacturer's time-based requirements.