2019 Lexmoto Diablo 0.1L Petrol · YA19 CXT

The most recent MOT test conducted on 18 April 2026 resulted in a pass with no recorded defects or advisories. Reviewing the full history from 2022 onwards shows a consistent and stable maintenance trend, as the vehicle has passed every annual inspection without a single noted fault. This suggests that the vehicle has been kept in a condition that meets all essential safety and environmental standards, showing no signs of worsening mechanical integrity or recurring issues. The recorded mileage of 3,335 miles is remarkably low for a seven-year-old vehicle, representing an annual average of roughly 476 miles. While this low usage implies very little wear on the engine, piston rings, and transmission, it also indicates that the vehicle has likely spent much of its life stationary. For a motorcycle, prolonged periods of standing can lead to specific mechanical issues that are not directly related to mileage, such as the degradation of rubber components and the stagnation of vital fluids. Given the clean MOT history and the low-mileage profile, your physical inspection should focus on age-related deterioration rather than wear and tear. Closely examine the tyres for any signs of perishing, sidewall cracking, or dry rot, as the rubber may have hardened over seven years despite having ample tread. Check the drive chain for signs of surface corrosion or stiff links, which can result from a lack of regular lubrication during periods of inactivity. You should also inspect the brake discs for excessive surface corrosion or pitting and ensure the calipers are not binding due to seized pistons from infrequent use. Additionally, verify that time-based servicing has been performed, as oil and brake fluid should be replaced based on the calendar year rather than just mileage to prevent chemical breakdown. Test the 12V battery's health, as long periods of standing often lead to a loss of charge capacity. During your test ride, pay close attention to the smoothness of the throttle response, the stability of the suspension, and any unusual noises from the drivetrain. Ensure there are no weeping seals around the front forks or engine casings, which can occur when seals dry out from lack of movement.