2022 Audi A1 Technik 30 Tfsi S-A 1.0L Petrol · YB22 BWE

An exceptionally low-use profile defines this vehicle, which has maintained a clean record of roadworthiness across its two recorded inspections. The most recent test on 12 June 2026 resulted in a pass with no defects or advisories noted, matching the clean result from the previous year on 25 June 2025. This indicates a consistent absence of recorded mechanical issues regarding structural integrity, lighting, or emissions within the scope of the MOT testing regime. The recorded mileage of 3,405 miles over a four-year period represents an average annual accumulation of approximately 851 miles. This level of usage is significantly lower than the UK average and suggests the vehicle has spent considerable time stationary or has been used only for very short, infrequent journeys. Mechanically, such low mileage means that high-wear components like brake discs, pads, and suspension bushes are unlikely to show significant degradation from friction or heavy load, though the lack of regular operation can sometimes lead to different issues such as tyre flat-spotting or seized calipers. Given the absence of any recorded advisories or failures, there are no specific component defects to investigate from the MOT history. However, because the vehicle has covered such minimal distance, a prospective buyer should focus the test drive on checking for any signs of long-term standing. Listen for any unevenness in the steering or pulling to one side, which could indicate tyre deformation, and monitor the braking performance for any hesitation or sponginess that might suggest the brake system has not been regularly cycled. While the MOT records show no faults, the low usage pattern warrants a close inspection of the vehicle's fluids and rubber components. During the test drive, pay attention to the engine's idle stability and any unusual noises from the drivetrain, as extremely low mileage can sometimes coincide with periods where seals or gaskets have not been regularly lubricated by moving parts. Ensure the vehicle accelerates smoothly through the gears to confirm that the transmission and engine components have remained functional despite the infrequent use.