2022 Nissan Qashqai Acenta Prem DIG-T Mhev 1.3L Hybrid electric (clean) · YB22 OTN

A consistent record of clean roadworthiness defines this vehicle, with two consecutive MOT tests showing no recorded defects. The most recent inspection on 12 August 2026 resulted in a pass with zero advisories, mirroring the clean result from the previous test on 20 August 2025. This indicates a stable mechanical profile regarding the components inspected under MOT standards, such as lighting, braking efficiency, and structural integrity, without any history of failures or recurring issues being flagged by examiners. The recorded mileage of 33,715 miles over approximately four years represents an average annual accumulation of roughly 8,429 miles. This usage pattern is consistent with typical UK driving profiles for a modern crossover, suggesting the vehicle has not been subjected to excessive high-speed motorway mileage nor has it suffered from the mechanical stagnation associated with very low-mileage vehicles that sit idle for long periods. This steady rate of use implies a predictable wear pattern for consumable components like brake pads, discs, and tyres. Given the absence of any recorded advisories or defects in the DVSA history, there are no specific mechanical faults to target for investigation. However, because the vehicle is approaching a higher mileage threshold and is of a certain age, a physical inspection should focus on the standard wear items that are not always the primary focus of an MOT pass. On a test drive, pay close attention to the suspension for any unexpected knocks or knocks when traversing uneven surfaces, which could indicate the onset of wear in the bushes or coil springs. Furthermore, monitor the steering for any pulling to one side or vibrations through the steering wheel, which may suggest alignment issues or uneven tyre wear. The braking system should be checked for any pedal judder or sponginess, which can indicate uneven disc wear or air in the system, even if the MOT pass confirms the brakes are currently functional. Finally, listen for any unusual engine noise or vibrations during acceleration to ensure the mild-hybrid drivetrain components are operating smoothly.