2018 Royal Enfield Bullet Classic EFI E4 0.5L Petrol · YC18 ABA

The Royal Enfield Bullet Classic EFI E4 presents a clean MOT history, with both its most recent test in July 2025 at 1,767 miles and the prior examination in August 2022 at 1,758 miles passing without any defects. This suggests a stable maintenance trend, with no recurring issues or advisories to indicate neglect or progressive wear. The absence of even minor faults—such as tyre tread depth, brake performance, or fluid leaks—points to either meticulous upkeep by previous owners or, more likely, the vehicle’s very low annual mileage mitigating natural wear. For a machine of this age, such a pristine record is unusual and raises questions about whether the mileage has been accurately recorded or if the bike has been stored for extended periods. The recorded mileage of just 1,767 miles over eight years—averaging around 221 miles per annum—is exceptionally low for a Royal Enfield, particularly one of this model’s vintage. The near-identical readings between the 2022 and 2025 tests (a mere 9-mile difference over three years) strongly imply either minimal real-world use or potential odometer manipulation. If genuine, this level of disuse could mean components like suspension bushes, chain and sprockets, and brake pads have seen far less stress than typical. However, it also means critical consumables—such as tyres, brake fluid, and battery health—may never have been fully exercised, potentially masking latent issues. Buyers should verify the mileage’s authenticity and consider whether the bike has been regularly ridden or left dormant. Given the lack of MOT advisories or defects, there are no obvious red flags in the official records to prioritise during a private inspection. That said, the buyer should still check for signs of corrosion on the frame, subframe, and exhaust system, particularly in areas prone to moisture retention. The suspension—front forks and rear shock absorbers—should be tested for fluid leaks or stiffness, as these can degrade even with minimal use. Brakes should be inspected for uneven wear or spongy pedals, while the chain and sprockets ought to be examined for rust or elongation, given the bike’s age. Finally, the battery’s health and the condition of the tyres—including sidewalls for cracking—should be verified, as these are often overlooked in low-mileage scenarios but can still fail unexpectedly after prolonged inactivity.