2022 Ford Transit Custom 280LIMITD Eblue 2.0L Diesel · YP22 FWM

The most recent MOT test conducted on 08 January 2026 resulted in a pass with no defects recorded. This follows a successful inspection in April 2025 which also yielded no defects or advisories. From a regulatory standpoint, the maintenance trend appears stable and consistent, suggesting that the vehicle has been maintained to a standard that meets all essential safety and environmental requirements without immediate mechanical failures or significant structural concerns. With a recorded mileage of 51,766 miles over approximately four years, the vehicle has covered an average of roughly 12,942 miles per annum. This represents a higher-than-average usage profile for its age, which is typical for a commercial van of this type. While regular usage often prevents issues associated with vehicles standing idle, such as seized components or fluid degradation, the higher mileage means that wear and tear on consumable parts will be more advanced. Prospective buyers should anticipate more significant wear on the braking system, suspension components, and drivetrain consumables compared to a lower-mileage vehicle. As the MOT history is currently clean, the inspection should focus on physical wear and age-related degradation. During a test drive, pay close attention to the suspension and steering; listen for any rhythmic knocking, clunking, or rattling, which could indicate worn suspension bushes, perished rubber mounts, or failing shock absorbers. Examine the tyres thoroughly for any signs of uneven tread wear, which may point to tracking or alignment issues, and check the sidewalls for any cracking or perishing. It is also vital to inspect the brake discs for heavy grooving or excessive corrosion and to check for any signs of binding calipers by monitoring for unusual heat or pulling to one side during braking. Given the commercial nature of the vehicle, a thorough review of the service book is essential to confirm that oil and filter changes have been carried out at the correct intervals to maintain engine integrity. Check the engine bay for any evidence of fluid leaks, specifically from the coolant system or the gearbox, and ensure that all essential fluids are at the correct levels and do not appear contaminated. Finally, verify the condition of the 12V battery and ensure that time-sensitive items, such as brake fluid and coolant, have been replaced in accordance with manufacturer recommendations, as these can degrade even if the mileage remains within acceptable limits.