2012 SEAT Leon 1.6L Diesel · GF12 SVT

This SEAT León has maintained a consistent MOT history with no defects recorded across five consecutive tests, including the most recent examination on 18 June 2025 at 120,003 miles. The absence of advisories or failings suggests the vehicle has undergone regular servicing and passed all mandatory checks without major mechanical or structural issues. However, the 13-month gap between the 2025 and 2024 tests—significantly longer than the usual 12-month interval—could imply either a deliberate deferral or a temporary unavailability of the vehicle. No recurring faults are evident in the record, though the lack of advisories does not preclude underlying wear that would require professional assessment. The recorded mileage of 120,003 miles over 14 years equates to approximately 8,572 miles annually, which aligns with typical usage patterns for a vehicle of this age. There are no abrupt spikes or prolonged inactivity periods in the data, though the intervals between tests vary slightly: the 2023 to 2021 gap spans 22 months, while the 2021 to 2023 interval is just 14 months. This inconsistency suggests occasional delays in MOT testing rather than a pattern of neglect. The steady mileage accumulation implies reasonable usage without extreme wear on high-mileage components like suspension bushes or drivetrain elements. Given the clean MOT record, a prospective buyer should prioritise a thorough inspection of suspension components, particularly the coil springs, bushes, and dampers, as these are common points of failure in vehicles of this age and mileage. The brakes, including calipers, pads, and discs, should be examined for uneven wear or binding, especially if the vehicle has been driven in varied conditions. Structural integrity, particularly around wheel arches and sills, should be assessed for corrosion, as this is a critical failure point for pre-2015 models. While the MOT history does not indicate past issues, these areas are prone to deterioration over time and may not have been formally tested during the MOT process.