2018 Audi A7 3.0L Diesel · LR68 FVM

The most recent MOT inspection conducted on 23 January 2026 resulted in a pass with no defects or advisories recorded. Reviewing the vehicle history back to early 2022, the maintenance trend is exceptionally stable, with a consistent record of clean passes. The absence of any recorded advisories over several years suggests that the vehicle has been maintained to a high standard, with wear and tear items likely replaced proactively before they reached a failure threshold. With a recorded mileage of 60,750 miles over approximately eight years, the vehicle has averaged roughly 7,594 miles per year. This represents a typical usage profile for a premium executive saloon, indicating a balanced mix of driving environments. This level of mileage is low enough to avoid premature fatigue of the drivetrain and major suspension components, yet high enough to ensure that the engine and auxiliary systems have been regularly exercised, reducing the likelihood of seals drying out or fluids stagnating. Despite the clean MOT history, a physical inspection is necessary to verify the condition of consumables that may not be flagged unless they reach a critical limit. You should carefully examine the tyre sidewalls for signs of perishing or fine cracking, as rubber degrades over time regardless of tread depth. Inspect the brake discs for surface corrosion and ensure there is no evidence of binding calipers, which can occur if the vehicle has spent extended periods stationary between journeys. The health of the 12V battery should also be verified, as an eight year old unit is often nearing the end of its expected service life. Finally, it is imperative to cross reference the DVSA records with the physical service book to confirm that calendar based maintenance has been performed. Pay close attention to the intervals for brake fluid replacement and engine oil changes, as these degrade over time regardless of the mileage covered. During the test drive, listen for any subtle knocks or clunks from the suspension bushes and check for any shuddering under braking, which would indicate disc warping. Verifying the timestamps on the service stamps will confirm if the vehicle has been maintained according to the manufacturer recommended schedule.