2011 Renault Scenic 1.6L Petrol · ML61 DZD

The 2025-04-18 test at 91,407 miles is the primary reference point for the vehicle's current roadworthiness, confirming that the overall condition has remained stable over the past two years, though the most recent failure on the same date indicates a potential shift in mechanical health. The vehicle has not shown a clear pattern of rapid mileage accumulation or sudden catastrophic failure, suggesting that the mechanical integrity of the drivetrain and suspension system has held relatively constant despite the significant mileage increase. The maintenance history reveals a complex mix of minor consumable wear and structural issues that are likely to require attention. The most recent test on 2025-04-18 failed due to severe deterioration of suspension components, specifically the ball joints and shock absorbers, which suggests that the previous owner may have neglected basic upkeep or that the wear is now accelerating. The 2024-04-10 test on 82,600 miles further confirms that the front and rear tyres have become worn close to the legal limit, indicating that basic tyre wear is a recurring issue rather than a single incident. These findings imply that the previous owner may have skipped routine servicing or performed repairs without addressing the underlying wear patterns. Given the recurring faults in the suspension and tyre wear, the buyer must inspect the vehicle for structural integrity and mechanical wear in person. The most critical concern is the presence of corrosion on the brake discs and the condition of the rear suspension bushings, which may indicate that the braking system is vulnerable to rust and that the suspension is prone to future failure. Additionally, the loose exhaust back box at the 2024-04-10 test suggests that the exhaust system is not securely sealed, which could lead to uncontrolled emissions and potential leaks. A thorough visual inspection is required to assess the condition of the engine bay, exhaust manifold, and the integrity of the rear suspension components before proceeding with any further work.