2022 Volkswagen Tiguan 2.0L Petrol · PF22 XPT

The 2022 Volkswagen Tiguan’s most recent MOT test on 2026-08-04 resulted in a passing grade, though it was accompanied by several persistent advisories that indicate a pattern of wear requiring attention. The vehicle’s tyre condition is a recurring concern, with all four tyres showing significant edge wear and nearing the legal limit, which suggests either underinflation, improper alignment, or excessive load distribution across the tyres. The presence of wax grease under the vehicle may indicate recent maintenance activity, but it does not inherently compromise roadworthiness, though it could mask potential leaks or fluid degradation if not addressed promptly. The advisories on the suspension arm pins or bushes from the previous MOT in 2025-07-28—described as worn but not causing excessive movement—highlight a developing issue that, if left unchecked, could lead to premature failure of suspension components, particularly if the vehicle experiences rough road conditions or heavy loads. This trend suggests that while the vehicle is currently roadworthy, the wear progression on both the tyres and suspension indicates that proactive servicing will be necessary to avoid future failures. The recorded mileage of 30,158 miles for a vehicle aged four years represents a reasonable annual usage rate of approximately 7,540 miles, which is typical for a Tiguan’s operating conditions. This level of mileage does not inherently indicate excessive wear beyond what is expected for its age, though the consistent advisories on tyre wear and suspension components warrant closer scrutiny. The absence of significant mileage gaps or rapid accumulation suggests that the vehicle has been driven under moderate conditions, though the wear patterns suggest some degree of stress on key components. For example, the edge wear on the tyres could be exacerbated by frequent cornering or driving on rough surfaces, while the suspension advisories may reflect prolonged exposure to vibration or uneven road loads. Buyers should consider that while the mileage is not alarmingly high, the recurring issues point to a need for regular maintenance to mitigate further wear. To proceed with a purchase, prospective buyers should conduct a thorough physical inspection of the vehicle’s mechanical condition, focusing on the areas highlighted by the MOT advisories. First, verify the tyre tread depth and ensure there is no further edge wear or signs of uneven wear patterns that could indicate misalignment or suspension issues. On a test drive, listen for unusual noises from the suspension, particularly clunks or rattles when driving over bumps, which may signal worn suspension arm bushes or pins. Check for any fluid leaks under the vehicle, as the wax grease may conceal potential oil or brake fluid leaks that could compromise component integrity. Inspect the suspension for any signs of binding or excessive play, and visually assess the condition of the coil springs and shock absorbers for signs of sagging or damage. Additionally, examine the brake system for any signs of corrosion on the discs or binding calipers, which can occur when the vehicle stands for prolonged periods without use. Beyond the immediate advisories, buyers should also address broader maintenance checks appropriate for the vehicle’s age and mileage. Given the Tiguan’s age, inspect the tyre sidewalls for signs of perishing or cracking, which can weaken the rubber and reduce safety over time. Check the 12V battery and associated electrical systems for signs of weakness, as older vehicles may experience reduced performance or failure if the battery is not maintained. Verify that all fluids—particularly the engine oil, brake fluid, and coolant—are at the correct levels and show no signs of degradation or contamination, as fluid degradation can accelerate wear on engine components and brake systems. Finally, ensure that the service history is up to date, particularly for items like the suspension servicing, as the advisories suggest that the vehicle may require a more comprehensive inspection of the suspension components. If possible, arrange for a professional inspection to confirm the condition of the suspension arms, tyres, and other critical systems before finalising the purchase.