2013 Fiat Ducato 2.3L Diesel · LD63 VDP

The 2013 Fiat Ducato presents a stable and unblemished roadworthiness record, with the most recent MOT conducted on 21 February 2025 at 148,279 miles returning a clean pass and zero defects. This outcome, combined with four consecutive defect-free passes stretching back to February 2023, indicates a resolving trend. The single failure recorded on 27 January 2022 at 116,368 miles shows no defects, suggesting the vehicle was either not presented in a testable condition or the failure was procedural rather than mechanical, and the matter was clearly rectified before the subsequent test four days later. The mileage accumulation is consistent and predictable. Between January 2022 and February 2025, the odometer advanced from 116,378 to 148,279 miles, a gain of roughly 31,901 miles over three years, averaging approximately 10,634 miles per year. This sits comfortably within the typical annual range of 11,406 miles calculated over the vehicle's thirteen-year life. The annual test intervals align neatly with steady, regular use, and there are no suspicious gaps or sudden spikes in accumulation that would suggest long periods of disuse or odometer tampering. Despite the clean MOT history, a buyer should conduct a thorough in-person inspection of the chassis and underbody for corrosion, as the Ducato's steel bodywork and ladder frame are susceptible to rust around suspension mounting points, sills, and the rear crossmember, particularly on a vehicle approaching fifteen years of age. The braking and suspension systems warrant close scrutiny; even with no flagged defects, 148,279 miles places significant wear on brake discs, pads, coil springs, and suspension bushes, all of which degrade gradually and may not trigger an MOT advisory until deterioration is advanced. Tyre condition and age should also be verified, as perishing sidewalls can develop between annual tests without presenting an immediate tread-depth failure. The clean record is encouraging, but it does not substitute for a hands-on mechanical inspection by a qualified technician before purchase.