2010 Audi A6 2.0L Diesel · PB10 WAL

The mechanical condition of this Audi A6 appears exceptionally stable, with the vehicle achieving five consecutive clean MOT passes between October 2021 and September 2025. The most recent inspection on 29 September 2025 at 72,265 miles resulted in no recorded defects or advisories, indicating that the vehicle has been maintained to a high standard. This consistent record of defect-free tests suggests that the previous owner prioritised preventative maintenance and addressed mechanical issues before they reached the point of failure. This vehicle has covered 72,265 miles over approximately 16 years, averaging roughly 4,500 miles annually. The mileage accumulation has remained steady and modest, with no evidence of long-term storage or periods of neglect. The data shows a gradual increase in usage, moving from 65,077 miles in October 2021 to the current figure, which confirms the car is being exercised regularly rather than sitting idle. Such consistent, low-intensity use often preserves drivetrain longevity but can sometimes lead to the premature degradation of rubber components or seals if the vehicle is not driven often enough to reach full operating temperatures. Given the absence of any recorded advisories in the history, a physical inspection should focus on components that typically age based on time rather than just mileage. You should prioritise a thorough check of the suspension bushes, track rod ends, and engine mounts, as the rubber elements in these parts will be reaching the end of their design life regardless of the low odometer reading. Inspect the brake discs for signs of surface corrosion or pitting from infrequent use, and verify the condition of the exhaust system for any signs of structural oxidation. While the MOT record is exemplary, checking for any hidden fluid leaks or perished hoses remains a prudent step for a vehicle of this age.