2019 Peugeot 2008 1.2L Petrol · DC68 EXE

A completely unblemished string of five consecutive first-time MOT passes characterises the inspection history of this seven-year-old Peugeot, culminating in a clean pass recorded on the tenth of February 2026. This consistent trajectory of roadworthiness shows no historical failures or escalating technical faults, with only minor front tyre wear advisories logged during its 2024 test that were subsequently cleared by subsequent examinations. Rather than pointing to a history of recurring mechanical failures or chronic structural decay, the official record reflects an absence of recorded statutory non-compliance across all evaluated safety and environmental criteria. A low cumulative mileage of 19,095 miles over roughly seven years translates to an exceptionally light annual average of under 3,000 miles, placing the vehicle well below typical national usage parameters. This minimal operational distance means mechanical sub-assemblies have experienced lower thermal cycles and reduced operational friction compared to higher-mileage counterparts of the same age. However, prospective buyers should verify that this restricted usage profile did not involve prolonged periods of total inactivity, which can occasionally lead to localized surface oxidation on brake discs or perished rubber components if the vehicle sat unmoving in damp storage environments. Given the specific mention of edge wear on the front tyres during the 2023-2024 testing cycle, a thorough physical examination of the current front rubber is essential to check for correct tread depth and even wear patterns across the shoulders. During the static pre-purchase inspection, inspect the inner and outer sidewalls of the front tyres closely, and pay attention to the alignment geometry to ensure the previous wear was not indicative of tracking misalignment or worn steering joints. On the road test, listen carefully for any structural knocks, clonks, or excessive feedback originating from the front suspension struts and wishbone bushes when navigating speed bumps or uneven road surfaces. Verify that the steering remains centered without any diagonal pull, and apply firm pressure to the brake pedal at speed to ensure the braking system responds linearly with no shudder or binding sensation through the pedal box.