2010 BMW 118 2.0L Petrol · RO60 YCD

The 2010 BMW 118 presents an exceptionally clean MOT record, with the most recent test on 7 October 2025 at 51,131 miles passing with zero defects. That marks five consecutive years of first-time passes with no advisories, indicating a stable and well-maintained vehicle. No recurring faults, no corrosion concerns, and no mechanical deterioration have been flagged across the entire recorded history. The maintenance trend is firmly stable, showing no signs of neglect or emerging wear patterns. The mileage accumulation tells a consistent story. Between October 2021 and October 2025, the car covered just 9,663 miles over four years, averaging roughly 2,416 miles annually. That is very low for a petrol hatchback of this age. The annual tests align neatly with this pattern, suggesting regular but light use rather than long-term storage. There are no sudden mileage jumps or suspicious gaps between tests, and the recorded mileages correspond logically with each successive October MOT date. Despite the clean paperwork, a physical inspection remains essential. Low-mileage vehicles that spend extended periods stationary can develop flat-spotted tyres, seized brake calipers, and deteriorated rubber bushes or seals that an MOT does not always expose. The rear brake discs and pads on BMW 1-series models of this era are prone to surface corrosion if the car sits unused, even if the parking brake still meets the efficiency threshold. Suspension components, particularly front lower arm bushes and anti-roll bar links, should be checked for perishing, as age rather than mileage drives that degradation. A prospective buyer should also inspect the underside for corrosion on subframes and suspension mounting points, verify that the tyres have adequate tread and date codes within safe limits, and confirm the exhaust system has no minor leaks that might not yet trigger a failure. The clean MOT record strongly suggests attentive ownership, but a hands-on check will confirm whether that care extends beyond the test requirements.